Computer & Electronic Services

Cowlacious DesignsTM

Hauntingly Good Electronic Products!TM

Home Up Feedback Contents Search
Back Up Next

 

[Under Construction]

Up

 

LED & Light Products

Universal Fading Eyes Deluxe

      
Universal Fading Eyes Deluxe

Unit can be powered from a 9v battery or a 9-24VDC power supply!

You've always been able to control the time of the fade-in/fade-out cycle, but now you can control how long the LED stays on during the cycle.

LED sockets on the 2' long wires allow you to easily change the LED's to any color you like. Use our LED's or use your own, this circuit can be adjusted to handle it!

The fading eyes circuit gives you two LED eyes that can be adjusted between a slow fade-in/fade-out to quick pulses. The speed is changed by simply adjusting the variable resistor with a small screw driver. Another adjustment allows you to set how long the LED stays on within the on/off fade cycle.

Available as an assembled unit or as a kit. This is a simple kit to build and has a lot of applications.

Our super bright LED's put out a strong beam of light and are available in Red, Yellow, Green, Orange or Blue.

(Battery Not Included)

Click HERE to see how customers are using this product.

Click HERE to see an Adobe Acrobat PDF file of the construction manual.

Key Benefits

Pricing

Description SKU # Price

Purchase via PayPal

Universal Fading Eyes Deluxe board (everything but the LED's)

Buy our LED's below or use your own!

UFED $11.95
Universal Fading Eyes Deluxe board - KIT (everything needed to build your own except the LED's)

Buy our LED's below or use your own!

UFED-K $8.99
Fading Eyes Circuit Board only UFED-CB $2.50
       

Ultra Bright LED's for the Universal Fading Eyes Deluxe Board

     
Red (pair)

WTR CLR,T1-3/4, 660nm, 1.9Vf, 2000MCD@20mA

LED-P2 $.50
Orange (pair)

WTR CLR,T1-3/4, 623nm, 2.1Vf, 7000MCD@20mA

LED-P3 $4.40
Yellow (Pair)

WTR CLR,T1-3/4, 590nm, 2.2Vf, 5000MCD@20mA

LED-P4 $1.20
Green (Pair)

WTR CLR,T1-3/4, 502nm, 3.5Vf, 3400MCD@20mA

LED-P5 $3.50
Blue (Pair)

WTR CLR,T1-3/4, 470nm, 5Vf, 3000MCD@20mA

LED-P6 $6.00

Cave Eyes

 
Cave Eyes

NEW for 2007!!

Our Cave Eyes products has gone through some major changes to make it even better than before!

New features include:

  • Up to 48 sets of eyes (96 LED's). Sets can be added in groups of four.
  • The new device can be turned on and off with trigger switches. Now you can up a scene where the eyes don't come on until you want them to and then the shut off when the tour group leaves the scene, making it ready for the next group.
  • Selectable programs - regular blink, slow wake-up, Fade-in / Fade-out, Test
  • Detachable LED wiring harnesses. Each harness is made up of 4 sets of LED's with 4 feet of wire between the LED's and the circuit. Up to twelve wiring harnesses can be attached to the board.
  • Harness are available with regular red, super bright red, super bright green, or super bright yellow LED's.
  • Custom programs and custom length wiring harnesses are also available.

Pricing

Description SKU # Price

Purchase via PayPal

Cave Eyes - Main board - Assembled CE-100 $33.95

Cave Eyes - Main board - Kit CE-100-K $25.95

4 foot LED Wire Harnesses

     
4' harness - with 4 sets of Regular Red LED's CEWH-RR $8.49

4' harness - with 4 sets of Super bright Red LED's CEWH-SR $9.95

4' harness - with 4 sets of Super bright Green LED's CEWH-SG $9.95

4' harness - with 4 sets of Super bright Yellow LED's CEWH-SY $9.95

Wire Harness Kits

(you assemble the wiring harness)

     
16' twisted pair (brown/black) 24ga wire, connector, strain relief, Regular Red LED's CEWH-RR-K $4.95

16' twisted pair (brown/black) 24ga wire, connector, strain relief, Super bright Red LED's CEWH-SR-K $6.49

16' twisted pair (brown/black) 24ga wire, connector, strain relief, Super bright Green LED's CEWH-SG-K $6.49

16' twisted pair (brown/black) 24ga wire, connector, strain relief, Super bright Yellow LED's CEWH-SY-K $6.49

Tool for attaching wire to the connector

AMP T-Handle Tool for .100" (.254mm) IDC connectors

This tool is used to push the wires into the connectors. It is only needed if you are creating your own wire harness with one of the Wire Harness Kits sold above.

CEWH-Tool $21.50

Example of the Cave Eyes product with all 12 wiring harnesses installed.

 

Light Sequenced Candelabra

 

     
Product in a Chandelier            Actual product

This circuit, controlled by a microcontroller, makes the lights on the candelabra/chandelier turn on one at a time when power is applied. There is a switch on the circuit board that allows you to have it go through the turn-on sequence and then all stay on or wait about 20 seconds and turn all the lights off and start the sequence again and repeat. It can handle up to five lights, 60W or below. Shown on the left with neon flicker bulbs.

Mine is actually a chandelier, but it works just the same. Thanks have to go to Christopher Silvia (a.k.a. the Isolated Looney) for his idea to have the lights sequence in the first place. Visit his crypt at Chris' Crypt . Chris has done some beautiful Halloween work.

Custom programming of light sequences is available!

Other uses

  • Turn on light sconces in a hallway one at a time.
  • Turn on Halloween Village components one at a time with custom programming.

Pricing

Description SKU # Price

Purchase via PayPal

Light Sequenced Candelabra - assembled LSC-1 $24.99
Light Sequenced Candelabra - Kit LSC-1-K $17.99
Custom programming LSC-1-CP $7.50

 


To pay by Check or Money Order, please click HERE.

775-741-1086Phone orders can be accepted for those using a Visa, MasterCard, or Discover Card.
 
To order TOLL FREE call 1-866-201-0760 (within the United State) or call 1-775-425-9151.

 

Join the Cowlacious Designs New Product & Sales Announcement Email list.

 

Home Up

Send mail to support@cowlacious.com with questions or comments about this web site.
Copyright © 2004 Computer & Electronic Services
Last modified: 09/26/07