Computer & Electronic Services

Cowlacious DesignsTM

Hauntingly Good Electronic Products!TM

Talking Skull Products

All of our talking skull products use the Scary Terry Audio Servo Driver for their sound synchronization.

The circuit inside the skull allows you to easily hook up audio to the circuit board to drive a servo for animating the jaw of your prop. Easily create a prop with that highly sought after animatronics effect!

Operates off of a 5-6vDC supply. The unit comes with a 4-AA battery holder to operate it off of batteries, but you can use your own 5vDC supply instead. This unit also includes a 5v regulator on the board so that you can power it off of a 9V to 24vDC supply. The unit has an RCA style audio input that can be driven by just about any CD player, Tape Deck, MP3 player, etc. (audio cable is not included).

ISD® ChipCorder® circuitry is included so that you can have a dedicated sound source for the animatronics. It can have up to 120 seconds of sound with the 25120 chip. The unit can be set-up to continually repeat the recorded sound or be triggered by one of our (or even our competitors) effect timers
 

Note: Although the playback circuitry is included for the ISD Chips, you will need to purchase an ISD chip recorder in order to put sound on the chip. We sell the Cowlacious ISD Chip Recorder/Player which can be used to record sound onto the ISD chip for use in the Scary Terry Products.

Available pre-assembled, as a kit, or circuit board only! The servo is not provided with any of the options.
 

Key Benefits

• Great looking animation!
• No programming required!
• Low cost!
• Small size - approx. 3" x 2.5"!

Video's from Scary Terry of the circuit in action!

Scary Terry's web site:  www.scary-terry.com

Pricing

ST100 plus an assembled Skull Kit - This unit is ready to start talking right out of the box, just supply power and an audio source. Skull unit is a 4th class Bucky Skull with a mounted HiTec HS-425BB servo set up to drive the jaw. (Shown here with the optional LED Audio Eyes)	ST100-Skull	$99.95
Same as above but with a 60 second ISD chip included. Note:  Go to Audio Products for the Cowlacious ISD® Chipcorder® Recorder/Player Board to be able to record your message on your ISD® chip.	ST100-60-Skull	$107.95	OUT OF STOCK FOR 2007
Same as above, but with a 120 second ISD chip included. Note:  Go to Audio Products for the Cowlacious ISD® Chipcorder® Recorder/Player Board to be able to record your message on your ISD® chip.	ST100-120-Skull	$112.95
ST100 plus a Skull Kit ($5.00 less than if purchased separately). Skull Kit includes:  a 4th class Bucky Skull, Servo (HiTec HS-425BB), aluminum servo mount, two 4" wire ties, 12" piece of .041 spring wire, and all the necessary screws and nuts.  All you have to provide is a  drill, a  couple of bits, and a little labor!	ST100-Skull-K	$74.95
ST100-60 plus a Skull Kit ($5.00 less than if purchased separately).	ST100-60-Skull-K	$82.95	OUT OF STOCK FOR 2007
ST100-120 plus a Skull Kit ($5.00 less than if purchased separately).	ST100-120-Skull-K	$87.95
ST100K plus a Skull Kit ($3.00 less than if purchased separately).	ST100K-Skull-K	$64.95
ST100K-60 plus a Skull Kit ($2.00 less than if purchased separately).	ST100K-60-Skull-K	$72.95	OUT OF STOCK FOR 2007
ST100K-120 plus a Skull Kit (2.00 less than if purchased separately).	ST100K-120-Skull-K	$77.95

Optional Accessories

Image	Description	SKU #	Price	Purchase via PayPal
	Skull Kit - Everything you need to make a talking skull (except the Scary Terry Audio Servo Driver). Kit includes a 4th class Bucky Skull, Servo (HiTec HS-425BB), aluminum servo mount, two 4" wire ties, 12" piece of .041 spring wire, and all the necessary screws and nuts.  All you have to provide is a way to drive the servo (such as our Scary Terry Audio Servo Driver circuit above), a drill, a  couple of bits, and a little labor!	Skull-K	45.95
	Just need the guts and not the skull? Then, this is the kit you need. This kit includes everything found in the skull kit, but the skull.	JTG-K	27.95
	12VDC wall transformer, 500ma	ACCY-AC-WT12VDC	$8.50
	LED Audio Eyes Accessory - RED Ultra Bright	ACCY-AE-3	$3.00
	3.5mm stereo to RCA stereo cable, 6'	ACCY-3.5-RCA	$4.00
	3.5mm stereo to 3.5mm stereo cable, 6'	ACCY-3.5-3.5	$4.00
	ZIF socket - Zero Insertion Force socket. This socket makes it easier to install and remove the ISD Audio chip. It isn't necessary, but it nice to use when you are first setting up your sounds. It plugs into the existing socket on the boards and can be removed when you have the sound the way you want it.	ZIF	$7.50
	AC powered computer speakers. Speaker Details	ACCY-SPK10-BLK	$11.95
	HiTEC HS-425BB Deluxe Servo. Servo Details	ACCY-HS-425BB	17.95
	ISD ChipCorder 2560, 60 second chip	ACCY-ISD-2560		No longer available as separate item
	ISD ChipCorder 25120, 120 second chip.	ACCY-ISD-25120		No longer available as separate item
Audio Eyes Cables & Ultra Bright LED's for use with the Scary Terry boards used in the skulls.
	Pair of cables that plug onto the Scary Terry Board and have sockets for the LED's on the other end.	ACCY-LEDCable-2	$2.50
	Red (pair) WTR CLR,T1-3/4, 660nm, 1.9Vf, 2000MCD@20mA	LED-P2	$.50
	Orange (pair) WTR CLR,T1-3/4, 623nm, 2.1Vf, 7000MCD@20mA	LED-P3	$4.40
	Yellow (Pair) WTR CLR,T1-3/4, 590nm, 2.2Vf, 5000MCD@20mA	LED-P4	$1.20
	Green (Pair) WTR CLR,T1-3/4, 502nm, 3.5Vf, 3400MCD@20mA	LED-P5	$3.50
	Blue (Pair) WTR CLR,T1-3/4, 470nm, 5Vf, 3000MCD@20mA	LED-P6	$6.00

To pay by Check or Money Order, please click HERE.

Phone orders can be accepted for those using a Visa, MasterCard, or Discover Card.

 

To order TOLL FREE call 1-866-201-0760

Send mail to support@cowlacious.com with questions or comments about this web site.
Copyright © 2004 Computer & Electronic Services
Last modified: 09/26/07